Melt Flow Index Tester Touch Screen Volumetric Melt Flow Index Meter
Professional melt flow index testing equipment for precise measurement of thermoplastic melt flow rates using both mass and volume methods.
Product Overview
This melt flow index tester measures the MFR value of various plastics and resins in viscous flow state under specific temperature and load conditions. It calculates the melt flow rate through a standard die every 10 minutes, making it suitable for engineering plastics including polycarbonate, polyarylsulfone, fluoroplastics, nylon, as well as polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), and other thermoplastics. Widely used in plastic production, manufacturing, petrochemical industries, research institutions, and quality inspection departments.
Compliance Standards
ISO 1133:1997 - Determination of Thermoplastic Melt Mass Flow Rate MFR and Melt Volume Flow Rate MVR
ASTM D1238 - Standard Test Method for Determination of Melt Flow Rate of Thermoplastics by Extrusion Plastometer
Testing Methods
Mass Method and Volume Method (MFR & MVR)
Display Interface
7-inch Touch Screen Controller
Key Features
- Chinese and English color LCD display interface
- Manual and automatic cutting capabilities
- Dual temperature control system for precise temperature accuracy and higher heating efficiency
- Dual-inlet sensors for accurate upper and lower temperature gradients, independent operation capability, and extended service life
- Barrel constructed from imported Hastelloy alloy with nitriding treatment
- Die made from durable carbon tungsten steel
- Insulation barrel manufactured from SUS304 stainless steel for long-term high-temperature rust resistance
- Automatic result calculation with printout functionality
Technical Specifications
| Temperature Range | 0℃ - 450℃ |
| Temperature Fluctuation | ±0.2℃ |
| Temperature Uniformity | ±1℃ |
| Temperature Display Resolution | 0.1℃ |
| Time Display Resolution | 0.1S |
| Displacement Accuracy | 0.001mm |
| Volume Timing | 0.001S |
| Mass Method Test Range | 0.1-150g/10min |
| Volume Method Test Result Range | 50-5000cm³/10min |
| Barrel Diameter | Φ2.095±0.005mm |
| Length of Outlet | 8.000±0.025mm |
| Diameter of Charging Barrel | Φ9.550±0.025mm |
| Weight Accuracy | ±0.5% |
| Output Mode | Miniature automatic printout |
| Cutting Method | Manual and automatic cutting |
| Test Load | Full set of eight-level weights |
| Power Supply Voltage | AC220V±10% 50HZ |
